how to

How to Fix Wooden Drawers that Stick

A wooden drawer that sticks can be a constant source of annoyance. Luckily, help is at hand. If you want to find how to fix wooden drawers that stick, follow our simple guide to stop this problem.

Try a Lubricant

You might find that simply lubricating the drawers will be enough to get them moving again. Try rubbing paraffin or WD-40 onto the areas where the drawers meet and you may find that this is an effective solution. However, you don’t have to restrict your repair to using these materials because most lubricants will do.

Try Candle Wax

You can try rubbing candle wax, using wax paper rubbed over the area or even hand soap as a temporary repair. All of these can be surprisingly effective and can be carried out using common household materials that you may have lying around. Olive oil, vegetable oil, or even butter may be enough to free up a sticking drawer, although we don’t recommend you do use butter, or you will find it smells once it becomes rancid! Still, we hope you get the idea that practically any lubricant can be used to free up a sticky drawer

Try Drawer Sliding Tape

For a longer-lasting repair, or if the above tip does not work, you can apply drawer sliding tape to the parts of the drawer that rub together. Drawer sliding tape or nylon adhesive tape is on sale from any hardware store and is not expensive.

Your first step to applying the tape is to prepare the area by cleaning it and removing any grease or residue. It is a good idea to sand it down so that your wood can accommodate the tape and that it sticks to it with perfect adhesion. You might want to vacuum clean the drawer tool to remove any dust. As with all DIY projects, good preparation is key to success and these tips on how to fix wooden drawers that stick is a perfect example of this simple rule.

Once you have prepared the area, stick the adhesive tape to the edges of the drawer so that when they meet, the surface is smooth and can slide.

Learning how to fix wooden drawers that stick is basic common sense. However, you do have to take this simple job seriously. If your tape does not stick to the drawer or you fail to cut it to size properly, smear butter on the joints or do any other crazy idea like this, a botched repair will only make the problem worse.  Once you have repaired one wooden drawer, it is surprising how often you may be tempted to fix wooden drawers that stick when you are visiting family or staying in accommodation elsewhere such as motels or guest houses.

How to Remove Tar from Carpeting

Getting tar on your carpet will ruin the appearance of your décor. Luckily, there are a couple of ways to remove this stubborn stain, but you do need to act as quickly as possible. If you need to find out how to remove tar from carpeting, sit down and take a deep breath. You can do this! Just keep calm and carry on.

Method 1: How to Remove Tar from Carpeting with Liquid Soap and Water

First of all, remove as much of the surface tar as you can with a knife or by scraping it off or by blotting it, depending upon how severe the tar is. Then run the vacuum cleaner over it, so that you can remove even more of the residue.

Mix warm water with liquid soap. Apply the mix to the stain working it through in a circular motion moving inwards, so you don’t risk spreading the stain.

Rinse the area with cold water. Repeat the process until the stain has gone. Then leave the carpet to dry overnight. Put down paper towels over the stain to soak up excess water, and vacuum clean when the carpet has dried out.

Method 2: How to Remove Tar from Carpeting with Hydrogen Peroxide

If Method 1 has not worked effectively and there is still a tar stain on your carpet, it is time to call in something stronger. Buy some 3% hydrogen peroxide from your hardware store, and spread this over the carpet stain. Leave in place for one minute, and then rinse off with plenty of water. Leave the carpet overnight to dry off naturally.

Method 3. How to Remove Tar from Carpeting with Carpet Cleaner and Alcohol

As with the other methods, act fast to remove surface tar with a knife, scraping off any excess if possible. Then try out the carpet cleaning products you may have. Hopefully, you will already have cleaned your carpet at some time, but if not, test out the cleaner on an inconspicuous place to ensure it doesn’t cause further damage.

If it is OK, add some rubbing alcohol to the tar stain and carpet cleaner mix, and blot it with a clean cloth. If the stain has been removed, rinse with water and allow it to dry overnight. If the stain is still visible, try spraying some WD40 over the area. This may help remove the stain too.