How to Fix a Hole in a Cabinet Door

Fixing a hole in a cabinet door is not difficult, but you have to do it right or your repair will look worse than the hole itself! However if you do it right, it will save you money and a whole load of hassle. If you’re wondering how to fix a door in a cabinet door, keep reading to find out the best way to do it.

How to Fix a Hole in a Cabinet Door: Step-by-Step

Step 1

First up you need to prepare the area around the hole. Sand down the hole to remove any old or chipped paint, remove the dust, and wipe away any residue so that the area is smooth and clean.

Step 2

Once the area is prepared and you are ready to start, mix the wood filler. Epoxy wood filler comes in two parts that have to be mixed together. You need to ensure that you do this in a well ventilated area, because you don’t want to inhale fumes. Wear protective gloves, eye protection, and a mask. This might seem extreme, but you don’t want the filler to splash into your eye as you mix it. You don’t want to breathe in those toxic fumes.

Step 3

Wood filler dries out very quickly once it is exposed to air, so you have to work fast. How to fix a hole in a cabinet door will largely depend upon the size of the hole.

If the hole in your cabinet door is small (around ½ inch diameter or less) you can use toothpicks to fill the hole. Dip the toothpicks into the resin and stick them into the hole. Carry on doing this until the hole is completely filled.

If the hole is bigger, you need to fill it with something that fills the space. Line the hole with the resin and then add your filling material such as dowling, cork, or a custom made piece. Add the wood filler on top until the surface is even.

Step 4

Leave the wood filler to dry completely. It can take up to 8 hours for it to dry, but check the packaging for more information.

Step 5

Once you are confident that the area is dry, you can snap off the tooth picks with shears. Try not to pull them away from the hole.

Step 6

Once you are satisfied that the hole is filled, you need to get your sander out or use sandpaper to make sure that the finish is smooth. If you can still see marks – or the surface is uneven, you can add a light layer of wood filler over the top. Do this and you will need to wait for it to dry again before you can sand it down. However it is worth taking time and doing it properly.

You will probably find that your cabinet door will need re-varnishing or painting, but the good news is that once you have finished, your cabinet door will be as good as new. Learning how to fix a hole in a cabinet door is an easy DIY skill that anyone can do, and as long as you follow all the steps you can rely on a successful result.